FASTFOOT footing fabric is a great material to form footings. Using FASTFOOT will save lumber, labor and concrete providing better quality footings. Also it will improve concrete that is poured on hot, dry ground which can lead to rapid evaporation and wicking of water. This will help to provide for proper hydration of the concrete.

1. Drive pairs of wood or steel stakes in the ground every 6' to 10' spaced the footing width apart.

2. Using a laser or builder's level, nail (or screw) the 2x4s to the inside of the stakes at the height of the desired footing.

3. Unroll Fastfoot® between the 2x4s, and staple in the correct position using the colored adjustment lines and a hammer tacker with 3/8" staples.

4. Place concrete.

180 North 100 East, Ste. K, Richfield, UT 84701
Tel: 435 896 0235, Fax: 435 896 8223